News

As the control core of a system, the reliability of hydraulic valves directly impacts equipment operation. In actual maintenance, 80% of hydraulic ...

Large equipment often runs several hydraulic functions at once, dividing pump flow and generating heat when valve passages are undersized. The SD25...

Pump running at full pressure with no load wastes energy and generates heat. The DA Series pilot-operated unloading valve from Laiye addresses this...

Laiye has introduced the SV/SL Series Pilot Operated Check Valve for load-holding circuits. This article looks at a common problem with standard ch...

This article looks at a sizing gap that appears in mid-flow hydraulic systems: equipment that has outgrown a 60 L/min valve but does not need the c...

Where sectional directional valves rely on seals between bolted sections, monoblock design removes those interfaces entirely. For compact equipment...

This article looks at a question that often comes up late in hydraulic system design: what happens to a solenoid directional valve when power is lo...

Selecting a sectional hydraulic valve often comes down to one practical question: how to control multiple actuators without over-sizing the valve b...

When power supply is unstable, maintenance is mechanically oriented, or equipment works in wet and dusty conditions, the electrical side of a solen...

As a critical actuator in hydraulic systems, the proper use and maintenance of hydraulic motors are essential for equipment longevity and operation...

The working principle of a hydraulic motor is based on Pascal's Law.

Through safety valves or overflow valves, when the system pressure exceeds the preset safety limit, the valve automatically opens to release excess...