Shijiazhuang Laiye Import& Export Trading Co., Ltd. is one of the leading manufacturers and suppliers of dcv60 — 60 l/min manual sectional directional valve in China, also supports customized service. If you're going to wholesale high quality dcv60 — 60 l/min manual sectional directional valve made in China, welcome to get pricelist from our factory.
Where This Valve Fits
The DCV60 is a sectional valve - built from individual sections bolted together into one stack. Each section controls one function. You can add or remove sections as your machine changes.
60 L/min at 350 bar. Available with 1 to 12 sections.
This is where the DCV series starts. Not the smallest valve we make, but the entry point of this particular family. If you're looking at the DCV100 and thinking it's more flow than you need, the DCV60 is probably where you should be looking.
It's not trying to be the biggest or the most powerful. It's trying to be the right size for a lot of mid-range equipment - the kind of machines that don't need 100 L/min but would struggle with anything smaller.
For equipment that fits this flow and pressure range, the DCV60 - 60 L/min Manual Sectional Directional Valve is a practical, no-fuss choice.
A Closer Look
60 L/min - What That Gets You
60 L/min is enough to run most mid-size equipment at productive speeds. Forklifts, small excavators, loaders - the machines where 60 L/min is the sweet spot. Not too much, not too little.
The 350 bar pressure rating is the same as the rest of the DCV series. That's worth noting - you're not giving up pressure capability by choosing the smaller flow option.
Sectional Construction - Why It Matters
The DCV60 is built from individual sections. Each section is a complete valve - its own spool, springs, and detent. You bolt them together into a stack. Need three functions? Use three sections. Need six? Add three more.
This matters because equipment changes over time. You might add a new attachment next year. You might reconfigure the machine for a different job. With a sectional valve, you're not locked in. You can adapt.
Surface Treatment
Phosphating. Passes 48-hour salt spray. Not paint - it doesn't peel.
Internal Leakage
15 cc/min at 160 bar, 50°C. Same as the larger DCV valves. The clearance between the spool and bore is held to the same standard across the series.
The DCV60 - 60 L/min Manual Sectional Directional Valve is built for equipment where the right size and flexibility matter more than chasing the biggest number.
How It Works
Push the lever. The spool moves inside its bore. Oil from the pump - entering through the P port - gets redirected to either the A or B port on that section. The cylinder extends or retracts. Let go, springs push the spool back to center. Flow stops.
That's it. No sensors. No circuit boards. No software to crash. Just a lever, a spool, and a block of iron.
Up to 12 sections. Each with its own lever and spool. All sections share the same P port. Each has its own A and B ports.
Add sections as you need them. Remove them if you don't. The valve grows with your machine.
Specifications
| Parameter | Value |
|---|---|
| Control method | Manual |
| Pressure medium | Mineral oil based hydraulic oil |
| Nominal flow | 60 L/min |
| Viscosity range | 12–400 CST |
| Operating pressure | 350 bar (35 MPa) |
| Internal leakage | 15 cc/min @160 bar, 50°C |
| Ambient temperature | -40°C to +80°C |
| Valve structure | Sectional |
| Surface treatment | Phosphating |
| Valve sections | 1 to 12 |
| Rustproof level | 48h neutral salt spray test |
About Us
We're a manufacturer, not a middleman. Shijiazhuang Laiye Import & Export Trading Co., Ltd. is part of Hebei Wendefu Hydraulic Technology Co., Ltd. We started in 1988 - over 35 years ago.
The factory has about 200 people. We machine, assemble, and test everything ourselves. Every valve gets tested individually, not as a batch sample. The test results go into a file with the valve's serial number.
Production & Quality
Production Process
Raw material inspection → precision machining → heat treatment → spool lapping → surface treatment (phosphating) → assembly → pressure testing → final inspection. Every step is done in-house.
Quality Commitment
100% incoming material inspection
Independent inspection records for each machining process
100% finished product testing on dedicated test stands
Each valve has a unique serial number with fully traceable test data
What We Offer
Pre-sales: technical consultation and system matching
In-sales: order tracking and delivery communication
After-sales: 12-month warranty with remote diagnostic support
ISO 9001 certified. Material certificates, test reports, and certificates of origin available upon request.
FAQ
Q: What is the difference between DCV60 and DCV100?
A: Flow rating. DCV60 is 60 L/min. DCV100 is 100 L/min. Both are sectional valves with the same pressure rating and leakage spec. Choose DCV60 if 60 L/min meets your needs. Choose DCV100 if you need more flow.
Q: Does the DCV60 come with overload valves?
A: Overload valves are optional per section. Specify when ordering if you need them.
Q: Does the DCV60 have a pressure reducing valve option?
A: Yes. The valve has a reserved port for a pressure reducing valve as shown on the dimension drawing. Specify when ordering.
Q: How does the DCV60 handle shock loads?
A: The sectional construction uses through-bolts that hold the stack tight. For extreme shock applications, we recommend adding a relief valve close to the actuator.
Q: What is the torque spec for the through-bolts?
A: Through-bolt torque is critical for proper section sealing. Contact us for the specific torque spec - it depends on the number of sections.
Q: Does the DCV60 come with mounting hardware?
A: Mounting bolts are typically not included. Contact us if you need bolts - we can supply them separately.
Hot Tags: dcv60 — 60 l/min manual sectional directional valve, China dcv60 — 60 l/min manual sectional directional valve, manufacturers, suppliers, factory
