Description

Send Inquiry

Shijiazhuang Laiye Import& Export Trading Co., Ltd. is one of the leading manufacturers and suppliers of BM3 Orbit Hydraulic Motor in China, also supports customized service. If you're going to wholesale high quality BM3 Orbit Hydraulic Motor made in China, welcome to get pricelist from our factory.

BM3 Orbit Hydraulic Motor - Upgraded Cycloidal Motor for Medium-High Pressure

The BM3 orbit hydraulic motor is the upgraded version of the BM2. Same family, better performance.

It uses the same cycloidal gear planetary transmission principle-proven, reliable. But the rotor profile is optimized. The bearings are upgraded. The internal flow channels are reworked. The result: higher pressure, better efficiency, longer life.

Where the BM2 handles standard duty, the BM3 steps up to medium-high pressure. Small excavator travel drives. Slewing rings. Heavy agricultural machinery. Port handling equipment. If the BM2 is starting to feel like it's working too hard, the BM3 is the natural upgrade.

Three questions to decide if you need the BM3

When you're choosing between BM2 and BM3, ask yourself three questions:

1. What pressure does your system run at?
If you're running at the upper end of the BM2's range, the BM3 gives you more headroom. It's built for higher pressure, so it won't be working at its limit all the time.

2. How long does your equipment run each day?
Continuous operation is harder on motors. The BM3's better heat dissipation and stronger bearings make it more suitable for all-day running.

3. How hard is it to service your equipment?
If the motor is hard to reach, you want one that lasts longer between services. The BM3's extended service life means fewer downtime events.

Product description

BM3 orbit hydraulic motor introduction

BM3 orbit hydraulic motor detail

BM3 orbit hydraulic motor data

Installation notes

Mounting: Standard flange mounting. Confirm configuration matches your equipment.

Ports: Standard hydraulic ports. Confirm thread type and size.

Start-up: Run at reduced pressure initially. Check connections before full operation.

Oil: Use recommended hydraulic oil. Monitor temperature-medium-high pressure means more heat.

Where it belongs

The BM3 orbit hydraulic motor is for applications that need more than the BM2 can deliver:

Small excavator travel drives - needs high torque at low speed, continuous operation

Slewing drives - starts and stops under load, shock loads

Heavy agricultural machinery - runs all day, high pressure

Port handling equipment - continuous duty, high cycles

Industrial rotary devices - mixers, agitators, indexing tables

About the company

Shijiazhuang Laiye Import & Export Trading Co., Ltd., part of Hebei Onederful® Hydraulic Technology Co., Ltd., has been making hydraulic components since 1988-over 35 years.

We're a factory, not a trading company. Around 200 employees. Full in-house production: casting, machining, assembly, testing, phosphating. We control the whole process.

Products go to Russia, Europe, the Middle East, South America, and Asia. ISO 9001 certified. Every motor is tested individually, with data linked to its serial number.

FAQ

Q: Manufacturer or trader?

A: Manufacturer. We do our own production.

Q: Can I use the BM3 on equipment that currently runs a BM2?

A: Yes. Mounting is the same-the BM3 bolts into the same space. But check your system pressure and flow first. The BM3 handles higher pressure, so if your system is already running at BM2 levels, the BM3 will have more headroom. If your pump flow is too high, you may need to adjust.

Q: Will I notice the difference immediately after switching from BM2 to BM3?

A: Not necessarily. The improvements are mostly about durability and headroom. You won't feel higher torque at the same pressure. What you'll notice is the motor running cooler, handling shock loads better, and lasting longer. The difference shows up over time, not right away.

Q: How much longer does the BM3 last compared to the BM2?

A: Depends on your operating conditions. With the same duty cycle and oil cleanliness, the BM3 typically lasts longer because of the stronger bearings, better heat dissipation, and tighter tolerances. We can give you a more specific estimate based on your actual operating parameters.

Q: Can I use the BM3 in a system that currently uses a gear motor?

A: Possibly. The BM3 is a direct drive alternative to gear reducers. It's more compact and eliminates the gearbox. Check your torque and speed requirements-if they match the BM3's range, it can be a direct replacement. Send us your current motor specs and we'll check compatibility.

Q: What happens if I run the BM3 at pressure above its rating?

A: Short-term, it may hold up. Long-term, it will wear faster-bearings, seals, and internal components all suffer. The pressure rating is there for a reason. Don't exceed it if you want the motor to last.