Description

Send Inquiry

Shijiazhuang Laiye Import& Export Trading Co., Ltd. is one of the leading manufacturers and suppliers of mh6we6 series electromagnetic directional valve in China, also supports customized service. If you're going to wholesale high quality mh6we6 series electromagnetic directional valve made in China, welcome to get pricelist from our factory.

Custom properties

Not every hydraulic system needs high flow. Some machines are small. Some circuits are simple. Some applications just don't need 80 liters a minute.

That's who the MH6WE6 is for. It's a direct-acting solenoid valve. NG6 size. 50 L/min. 250 bar at P/A/B. It does the same job as a standard NG6 valve - just scaled for smaller systems.

The MH6WE6 Series Electromagnetic Directional Valve is designed for equipment that doesn't need the full capacity of a 4WE6. Smaller cylinders. Lighter loads. Simpler circuits. If 50 L/min is enough for your application, this is the right size.

Power the solenoid, the spool shifts, oil flows. Cut the power, the spring brings it back. No pilot stage. No external controls. Just direct-acting reliability.

Available with spool types E, J, H, G, D, Y. Voltage options DC12V/24V or AC110/220V. Wet-pin solenoid. Removable coil. No need to open the pressure chamber to replace it.

For small machine tools, light industrial machinery, precision instruments, and compact power units, the MH6WE6 is the valve.

Transaction

Minimum order quantity: 10 pieces
Payment method: T/T, Paypal, Western Union
Supply Ability: Annual output of 1,000,000
Delivery time: 10-15 days
Conventional packing: Wooden case

PRODUCT PARAMETERS
Specification		6
Max working pressure Mpa	P/A/B ( Oil ports )	250
	T(Oil ports)	50
Working Voltage	DC	12/24
	AC	110/220

Product introduction

Onederful^® Hydraulic	WE6.…60/type solenoid directional valve			Directional valve
	Specification 6	Pressure up to 31.5 MPa	Flow rate up to 60L/min
-The standard type uses a direct-acting electromagnet-operated directional slide valve. -Wet DC or AC electromagnets with detachable coils -The electromagnet can rotate 90 degrees. -Can the line diagram be changed without draining oil? -Single or centralized connection can be selected. -Optional manual emergency operation

MH6WE6 series Electromagnetic Directional Valve data

Installation

Mounting. NG6 / CETOP 03 subplate. Verify the porting pattern lines up with your manifold.

Electrical hookup. Confirm coil voltage prior to wiring - DC12V, DC24V, AC110V, AC220V. The rating is stamped on the coil itself.

Swapping the coil. Undo the retaining nut, slide the coil off, put the new one on. The valve body stays together. Nothing leaks. Takes about five minutes.

Upkeep. Clean oil matters. Spool and bore are a matched precision pair. Dirt is what causes sticking most of the time. Valve not shifting? Check voltage first, oil cleanliness second.

Manual override. Available as an option. Certain models have a push-pin at the solenoid end so you can operate it by hand if power drops out.

Where it belongs

The MH6WE6 Series Electromagnetic Directional Valve is used in hydraulic systems requiring reliable directional control at flows up to 50 L/min:

Small machine tools - tool clamping, workpiece positioning

Light industrial machinery - small presses, assembly equipment

Precision instruments - medical equipment, testing devices

Compact power units - small hydraulic power packs

Mobile equipment - small loaders, aerial platforms

About the company

Shijiazhuang Laiye Import & Export Trading Co., Ltd., part of Hebei Onederful^®Hydraulic Technology Co., Ltd., has been making hydraulic components since 1988 - over 35 years.

We're a factory, not a trading company. Around 200 employees. Full in-house production: casting, machining, assembly, testing, phosphating.

Products go to Russia, Europe, the Middle East, South America, and Asia. ISO 9001 certified. Every valve is tested individually, with data linked to its serial number.

What wet-pin actually means

You'll see "wet-pin solenoid" on a lot of datasheets. Here's what it means in practice.

Dry solenoid. The armature moves in air. The coil generates heat. Air doesn't carry heat away well, so the coil runs hotter. Moisture in the air can corrode internal parts over time. Switching is louder - metal hitting metal without any damping.

Wet-pin solenoid. The armature is immersed in hydraulic oil. The oil carries heat away, so the coil runs cooler. The oil dampens the movement, so switching is quieter. No air means no moisture, so internal parts don't corrode. The result: longer life, smoother operation, less maintenance.

The MH6WE6 uses wet-pin. It's one of those design choices that doesn't sound like much on paper but makes a real difference in the field.

FAQ

Q: How to make payment?

A: Paypal, Westen Union, Money Gram or T/T transfer etc

Q: What is the packing method?

A: For small piece, we use carton box; for big piece, we use exporting grade plywood case.

Q: What is the warranty ?

A: 12 months against B/L date

Q: What kind of valve is WE6? Where is it mainly used?

A: WE6 is a lightweight, high-efficiency and low-power electromagnetic directional control valve, specially designed for miniaturized application scenarios - precision instruments, light automation equipment, small hydraulic stations and other systems with limited space. It adopts an integrated design, featuring a small installation volume, sensitive response and low operating noise, meeting the requirements of high-frequency commutation conditions.

Q: Is the electromagnet of WE6 operating normally?

A: During normal operation, the coil will experience a temperature rise. It is normal to feel it warm to the touch. If it is extremely hot, it could be due to excessive voltage, moisture in the coil, or a stuck valve core causing an excessive current.

Q: Is the maintenance cost of WE6 high?

A: Not high. The integrated design has fewer failure points, the sealing components are wear-resistant, and the maintenance frequency is low. The coil can be replaced separately without disassembling the valve body.